Additional components that could be connected to COT oil refiner system
COT Waterabsorbing/Particle Filters
Upon customer request COT Oil Refiner System can also be equipped with a unique 3-micron filter with extra capacity to absorb temporary high intrusion of water and – of course – small solid particles. Preferably used when the main oil system runs irregularly and when the ambient environment contains significant level of humidity – with high likeliness of exposure to water. Since the COT Oil Refiner continuously removes water collected by the filter, there is no need for filter Changes due to water.
Particle Filter F060

Technical Data – Particle Filter F060 |
|
Material |
Aluminium Alloy/ Polyamide, GE Reinforced |
Weight |
0.9 kg (2 lb) |
Measurment |
175 x 95 mm (6.9 x 3.8 inch) |
Filtration Rating |
3 microns, β-value=200 (acc ISO 16889 Δp 2.5 bar) |
Max Particle Capacity |
20 g (ISO-MTD to 2.5 bar) |
Max Water Capacity |
60 ml |
Pressure |
Max 10 bar |
Particle Filter F350

Technical Data – Particle Filter F350 |
|
Material |
Aluminium Alloy/Steel |
Weight |
7 kg (15 lb) |
Measurment |
305 x 170 mm (12 x 6.7 inch) |
Filtration Rating |
3 microns, β-value=200 (acc ISO 16889 Δp 2.5 bar) |
Max Particle Capacity |
65 g (ISO-MTD to 2.5 bar) |
Max Water Capacity |
350 ml |
Pressure |
Max 10 bar |
COT Preheater
To be installed when the operating oil temperature of the main oil system normally stays below 50°C (120°F)

Technical Data – Preheater |
|
Weight |
1.0 kg |
Measurment |
320 x 48 mm |
Voltage |
12-24 DC/20A or 110-230AC/5A |
Power Consumtion |
125-145W |
COT Pump
A low-flow pump is installed when a reliable regular supply from the main oil system cannot be guaranteed. This solution is recommended in case of an off- line function during longer periods of inactive system.
COT Indicator
Indicator that continuously shows the current water content within the oil. The sensor could be linked to any control unit as mobile app or wifi conection.